Every extra tight tolerance on a CNC drawing multiplies machining time, fixture care, and inspection cost. The fix is not “open everything up” — it is an inspection plan that spends metrology where fit actually fails.
Start with functional CTQs
Mark dimensions that control assembly, sealing, bearing fit, or alignment. Those become the inspection backbone. Reference or cosmetic dimensions can stay on a lighter check. Share the CTQ list with your CNC supplier so quoting and quality use the same priority list.
Match method to tolerance
- ±0.1 mm open features → calipers / micrometers
- ±0.05 mm production defaults → calibrated hand tools + process checks
- GD&T position / profile → CMM or dedicated gauges
- Surface finish callouts → profilometer samples, not 100% if unnecessary
Our quality system stages incoming, in-process, and final checks so CTQs are caught before pack-out.
Sampling that still protects the lot
Prototype lots of 1–5 pcs usually get 100% CTQ inspection. Pilot lots may use tightened sampling once the process is stable. Blind “inspect everything 100%” on large small-batch runs rarely improves yield as much as better fixturing and in-process stops.
Put the plan on the PO
A one-page inspection plan attached to the PO beats email threads mid-job. Include revision, CTQs, method, sample size, and report format. That document is what receiving inspection can mirror on your side.
Example: turning a noisy drawing into a plan
A robotics housing might show forty dimensions, but only six control bearing bore fit, seal groove width, and mounting pattern true position. Those six become CTQs with stated methods; the rest stay reference or standard commercial tolerance. The quote then prices CMM time for the pattern, micrometers for the bore, and a short report — not a forty-line program.
Bring that same discipline to sheet-metal bends and vacuum-cast cosmetics: inspect what the assembly feels, not every cosmetic edge unless appearance is contractual.
Want us to propose a plan with pricing? Upload drawings and note which fits are critical. For capability context, see Our Capabilities.