Revision control prevents a supplier from machining a newer model against an older drawing. Every RFQ and purchase release should identify one approved part number and revision so the manufacturing and inspection teams work from the same definition.
Name the files consistently
Put the part number, revision, and release date in the package. Use the same revision on the STEP model and 2D drawing. Avoid labels such as final-new or latest when several versions have circulated.
Record changes with their impact
For each revision, identify changed geometry, tolerances, material, finish, and inspection requirements. State whether work already in process may continue or must be reviewed. NIST highlights traceable design-to-inspection information in digital manufacturing.
Confirm the release
Before cutting, ask the receiving team to acknowledge the drawing and model revision. Keep the accepted quote tied to that release. If a change arrives after production starts, request an impact review rather than assuming the new file automatically replaces the old one.
Related guide: STEP and STL file formats.
Use a release package that identifies what changed
A revised PDF can conflict with an unchanged STEP file even when both have a recent filename. Assign a controlled part number and revision to the full package. Include the model, drawing, finish notes, hardware references and any approved deviations. Archive superseded files so they remain traceable without appearing to be current production instructions.
Revision release checklist
- Confirm that model and drawing describe the same geometry and units.
- List changed dimensions, material, finish or inspection requirements.
- Identify affected quantities and whether work has already started.
- Request confirmation of price, process or schedule effects before release.
- Record who approved the revision and which files are controlling.
Revision-control questions
Is an email attachment enough to authorize a change?
Only when the agreed approval process identifies it as the current release. Avoid informal messages that leave multiple plausible versions in circulation.
Does a cosmetic-only change need revision control?
Yes when it changes acceptance, preparation, marking or packaging. It may not alter solid geometry but can still change the manufacturing requirement.
At production handoff
Compare the accepted prototype package with the current production package. Use the handoff checklist to review differences instead of assuming the latest filename contains every approved decision.