STEP (.step or .stp) normally carries CAD geometry as precise surfaces and solids. STL describes a triangulated mesh. A mesh can show shape, but it may hide nominal features or introduce faceting that complicates precision machining and measurement.
Which file should you send?
For a conventional CNC part, send a STEP solid whenever possible. If only an STL exists, explain whether reverse engineering or remodeling is expected and which features must be exact. Mesh density does not replace a dimensional drawing.
What the drawing adds
Neither format reliably communicates all functional tolerances, threads, surface finishes, or inspection requirements. Attach a 2D drawing with critical dimensions and material information. Autodesk documents its export format options; check the settings in your CAD system before sending.
Before upload or email
Open the exported file in a neutral viewer, check units, body count, and orientation, and include revision identification. See the CNC design guide for the other RFQ essentials.
Compare geometry representation, not only filename
| Format | Useful distinction |
|---|---|
| STEP / STP | Often transfers precise CAD surface and solid geometry between systems. |
| STL | Represents a surface with triangles; resolution affects the approximation. |
| PDF drawing | Communicates controlled dimensions, finish, threads and notes. |
Export quality matters. A STEP file can still contain missing surfaces or an unintended revision; a fine STL remains a mesh rather than restoring the original CAD definition. Open the export in a separate viewer before submission.
CAD file questions
Can an STL simply be renamed to STEP?
No. Renaming does not change the geometry representation. Conversion may require reconstruction and review against the intended dimensions.
Does a STEP file establish every manufacturing requirement?
Not necessarily. Threads, finish, inspection and tolerances may need a drawing or an agreed model-based definition package.
File export checklist
Confirm units, orientation, solid validity, small features and revision. Identify the controlling drawing if it differs from a reference model. Read the CNC design guide before treating a clean CAD export as a complete RFQ.