Ability:

Applicable molds: We can use resin molds (over 80 pieces), ABS molds (over 280 pieces), and aluminum alloy molds (over 900 pieces) for our production.

Casting material: We use a two-component polyurethane cool PU, with current materials including HD-PU4210, DCP-RIM, and AXSON-RIM 875. These materials have physical properties similar to PP/ABS, providing aging resistance, strong impact resistance, high fit, and easy assembly and disassembly.

Injection pressure: The injection pressure is approximately 10MPa.

Flow control: We are able to control the flow at 620g/s.

General working time: Each piece typically requires a working time of 20-30 minutes.

Demoulding temperature: We ensure the demoulding temperature remains below 40°C.

Curing: For optimal performance, the parts should be cured at 85°C for 2-4 hours after demoulding.

Note: Please review the translated content for accuracy and ensure it captures the intended message.